Fluke 125 Industrial ScopeMeter (40 MHz) Oscilloscopes







  •     
  •     
  •     
  •     
  •     
  •     
  •     
  •     
Manufacturer: Fluke Product Series: 120 Series
Base Model: 125 Total Listings: 25 Units
Description: Industrial ScopeMeter (40 MHz) Oscilloscopes
Data Sheet PDF: Download 125 Data Sheet
Dealer's Lowest Price: GET QUOTE
New : $139     
Used : $5     
Rental : N/A     
Lease : $1     
Calibration : N/A     
Price is not right? We can notify you when a listing matches your price. Notify me
Quote Now !













Add message to dealer?



Quote 125 Now !  

AVAILABLE INVENTORY
  
PRODUCT SPECIFICATIONS
  
PRODUCT OVERVIEW
  
VIDEO & LITERATURES
  
USER REVIEWS
  
FORUM
Fluke 125 Inventory Listings
  
Filter by:                     APPLY FILTER

  PRODUCTRESELLERNEWUSEDRENTALLEASECALIBRATION 
144Agilent U1253A
Agilent U1253A Handheld Digital Multimeter 4.5-digit Organic LED Display
-$450-$24-
23N5230A-080-125
Agilent / HP N5230A Network Analyzer, 300 kHz up to 50 GHz, PNA-L series
-$42,645---
85DPO71254C
Digital & Mixed Signal Oscilloscope, 12.5 GHz, 4 CH
-$84,999---
85MSO71254C-
Digital & Mixed Signal Oscilloscope, 12.5 GHz, 4 CH
-$84,999---
85125
125 Dealer product details page link
ScopeMeter® Oscilloscope
-----
335125
125 Dealer product details page link
125 - Fluke 125 40.0MHz Scope / Meters
-----
1293125
Hart Scientific Model 3125 Surface Calibrator Surface probes are difficult to calibrate because it's hard to find a flat, heated surface that's stable and uniform. The Hart Scientific Model 3125
-----
1296125A
Electrical Standard Two Phase System (Master 6105A + Auxiliary 6106A) The 6105A and 6100B provide the signals to allow the processes described above to be completed effectively, quickly and by
-----
1296125A-50A
Electrical Standard Two Phase System (Master 6105A + Auxiliary 6106A) The 6105A and 6100B provide the signals to allow the processes described above to be completed effectively, quickly and by
-----
1296125A-50A-CLK
Electrical Standard Two Phase System (Master 6105A + Auxiliary 6105A) The 6105A and 6100B provide the signals to allow the processes described above to be completed effectively, quickly and by
-----
Current Page: 1 of 3Jump to other pages: 123NextLast



Fluke 125 Product Overview
( own it? please share by Add Your Own Review! )
Specifications
Oscilloscope Bandwidth  40 MHz
Dual input True RMS Meter  Vdc, Vac, Vac+Vdc, Ohms,Continuity , Diode-test
 Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset
TrendPlot Recording  Automatic vertical scaling and time compression.
 Display the actual, MIN, MAX and AVG reading.
Cursors  ?T, 1/?T, V, ?V, rise- and fall time
Real-time sample rate  25 MS/s
Equivalent sampling rate  up to 2.5 GS/s (125, 124) or 1.25 GS/s (123).
Inputs and digitizers   2
Timebase range  20 ns - 1 min/div
Input sensitivity  5 mV - 500 V/div
Trigger types  Connect-and-View™, Free Run, Single Shot, Edge, Video, External
Glitch capture  40 ns
Scope measurements  Automatic measurements: 26 (all instruments) On top, Fluke 125 has additional measurement functions for Power (W), VA, VAR and Power Factor (PF) for single phase and balanced-three-phase (delta) power systems.
Harmonics mode  Fluke 125 has capbility to analyze the harmonics contents of power signals. See below for details.
Maximum record length  512 min/max pts per input
Memory  20 screens and setups
Additional Power measurement capabilities (Fluke 125 only)
Measurement types:  Watt,
 VA,
 VAR,
 Power Factor (PF)
Power configuration:  Single phase or balanced three-phase (delta-configuration) mains supply
Voltage measurement  Channel A; using STL120, voltage probe or direct input
Current measurement  Channel B, using i400s (included) or other compatible current clamp
Current Clamp or Shunt sensitivity:  0.1 / 1 / 10 / 100 / 1000 mV/A, 10 mV/mA and 400 mV/A.
Harmonics Mode (Fluke 125 only)
 Converts waveform information into a harmonics display (using FFT processing) which shows the relative amplitudes of the 1st up to the 33rd harmonic
Analyzed waveform:  Voltage waveform(Ch.A), Current wavefrom (Ch.B) or Power (Ch.A x Ch.B), automatically generated.
Harmonics Frequency range:  DC up to 33rd harmonic (for fundamental up to 60 Hz);
 DC up to 24th harmonic (for fundamental up to 400 Hz).
Display  Bargraph showing 1st up to 33rd harmonic and DC; amplitude displayed in % relative to fundamental
Measurements:  Relative amplitude of individual harmonics;
 THD in %r or %f.
Environmental Specifications
Operating Temperature  0 ºC to 50 ºC
Storage Temperature  -20 °C to +60 °C
Operating Altitude  3,000 m
Safety Specifications
Electrical Safety  600V CAT III (EN61010-1)
Mechanical & General Specifications
Size  232 x 115 x 50 mm
Weight  1.2 kg
Warranty  3-years on main instrument, 1-year on accessories
Battery Life  7 hrs using NiMH
RS232/USB Interface  Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC

More details on Fluke website
Fluke 125 Related Literatures
Can not find any related application notes
Fluke 125 User Reviews
No user reviews yet. Please share your experience and be the first to review this product!

Add Your Own Review
How do you rate this product: 
   (point your mouse over the stars and click to select)
How long have you owned this product?   

Please enter a title for your review


Please type your review below
    Add Review
Fluke 125 Related Videos
No related videos found for Fluke 125
  Notify me when the product meets my target price

Model Number: 125
Email Address:
Product Condition:
Target Price:

Notify Me      Cancel


Add Dealer | New User Sign Up | Questions or comments? Contact us, we are listening Copyright 2008 - 2016 TestUnlimited.com, Your Test Equipment Community!