Home >> Cable Analyzers >> Fluke >> DTX-1800



            
Fluke DTX-1800 Copper and fiber certification tester guarantees cabling installations comply with TIA/ISO standards.

( own it? please share by Add Your Own Review! )

Product Information
Manufacturer: Fluke
Base Model: DTX-1800
Product Series: DTX CableAnalyzer
Description: Copper and fiber certification tester guarantees cabling installations comply with TIA/ISO standards.
Data Sheet PDF: Download DTX-1800 Data Sheet
Total Listings: 2 Units
Dealer's Lowest Price: New : N/A
Used: N/A
Rental: N/A
Lease: N/A
Calibration: N/A

Price is not right? We can notify you when a listing matches your price.     Notify me
 
Get Competing Price Quotes on this DTX-1800
Fluke DTX-1800 Product Overview

Cable Types  Shielded and unshielded Twisted Pair (STP, FTP, SSTP and UTP) LAN cabling:


Standard Link Interface Adapters  TIA Category 3, 4, 5, 5E and 6 and 6A : 100Ω

ISO/IEC Class C and D: 100Ω and 120Ω

ISO/ IEC Class E, 100 Ω ISO/ IEC Class F, 100Ω

Cat 6A/ Class EA permanent link adapters Plug type and life: shielded and unshielded cable, TIA Cat 3, 4, 5, 5e, 6, 6A and ISO/IEC Class C, D, E and EA permanent link

Cat 6A/Class EA channel adapters Plug type and life: shielded and unshielded cable, TIA Cat 3, 4, 5, 5e, 6, 6A and ISO/IEC Class C, D, E and EA channels


Test Standards  TIA Category 3, 5e, 6 per ANSI/TIA-568-C.2
TIA Category 5 (1000BASE-T) per TIA TSB-95
TIA Category 6 per TIA/EIA-568B.2-1
TIA Category 6A per ANSI/TIA-568-C.2 (6A DTX-1800 only)
TIA TSB-155 (DTX-1800 only)
TR 24750 (DTX-1800 only)
ISO/IEC 11801 Class C, D, and E
ISO/IEC 11801 Class Ea, F (DTX-1800 only)
EN 50173 Class C, D, E
EN 50173 Class EA, F (DTX-1800 only)
ANSI TP-PMD
IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
IEEE 802.3an 10GBASE-T

Speed of Autotest  Full 2-way Autotest of Category 6 Twisted-Pair links in 9 seconds
Full 2-way Autotest of Category 6A and ISO/IEC Class F links in 22 seconds
Supported Tests Parameters  (The selected test standard determines the test parameters and the frequency range of the tests)

Wire Map
Length
Propagation Delay
Delay Skew
DC Loop Resistance
Insertion Loss (Attenuation)
Return Loss (RL), RL @ Remote
NEXT, NEXT @ Remote
Attenuation-to-crosstalk Ratio (ACR-N), ACR-N @ Remote
ACR-F (ELFEXT), ACR-F @ Remote
Power Sum ACR-F (ELFEXT), PS ACR-F @ Remote
Power Sum NEXT, PS NEXT @ Remote
Power Sum ACR-N, PS ACR-N @ Remote
Power Sum Alien Near End Xtalk (PS ANEXT)
Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)


Cable Tone Generator  Generates tones that can be detected by a tone probe such as a Fluke Networks IntelliTone probe. The tones are generated on all pairs. Frequency range on all pairs. Frequency range of tones: 440 Hz to 831 Hz
Display  3.7 in (9.4 cm) diagonal, 240 dots wide by 320 dots high, passive color, transmissive LCD with backlight.
Input Protection  Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage.
Case  High impact plastic with shock absorbing overmold
Dimensions  Main unit and Smart Remote: 8.5 in x 4.4 in x 2.4 in (21.6 cm x 11.2 cm x 6cm), nominal
Weight  2.4 lb (1.1 kg), nominal (without adapter or module)
Operating Temperature  32°F to 104°F (0°C to 40°C)
Storage Temperature  -4°F to ?°F (-20°C to °C)
Operating relative humidity (% RH without condensation)  32°F to 95 °F (0°C to 35°C): 0 % to 90 % 95°F to 113°F (35°C to 45°C): 0 % to 70 %
Vibration  Random, 2 g, 5 Hz -500 Hz
Shock  1 m drop test with and without module and adapter attached
Safety  CSA C22.2 No. 1010.1: 1992 EN 61010-1 1st Edition Amendments 1, 2
Pollution degree  Pollution Degree 2 as defined in IEC 60664 and applied to IEC 60950 "Safety of Information Technology Equipment, 1999"
Altitude Operating: 4000 m; Storage: 12000 m
EMC EN 61326-1
Power Main unit and remote: Lithium-ion battery pack, 7.4 V, 4000 mAh

Typical battery life: 12 to 14 hours
Charge time (with tester off): 4 hours (below 40 °C)
AC adapter/charger, USA version: Linear power supply; Input 108 V ac to 132 V ac, 60 Hz ; Output 15 V dc, 1.2 A
AC adapter/charger, international version: Switching power supply; Input 90 V ac to 264 V ac, 48 to 62 Hz; Output 15 V dc, 1.2 A (isolated output)
Memory backup power in main unit: Lithium battery
Typical life of lithium battery: 5 years
The battery will not charge at temperatures outside of 0°C to 45°C (32°F to 113°F). The battery charges at a reduced rate between 40°C and 45°C (104°F and 113°F).

Languages Supported English, French, German, Spanish, Portuguese, Italian, Japanese, and Simplified Chinese, Traditional Chinese, Korean, Russian, Czech, Polish, Swedish, Hungarian.
Calibration Service center calibration period is 1 year




Performance Specifications Note: all specifications for tests on twisted-pair cabling apply to 100 Ω   cable. Contact Fluke Networks for information on measurement performance for cable with a different impedance.
Baseline accuracy The baseline accuracy of all DTX Series testers meets or exceeds the requirements of Level IV as in IEC 61935-1/Ed. 3 over the frequency range supported by the tester.
Category 6A/Class EA link test modes (and lower link categories)  DTX CableAnalyzer far exceeds Level III requirements of ANSI/TIA-1152 and IEC 61935-1/Ed.3
Class F link test modes  DTX-1800 is meets or exceeds the requirements of Level IV as in IEC 61935-1/Ed. 3.
Length for Twisted Pair Cabling  (Length specs do not include the uncertainty of the cable's NVP Value)
Parameter Single-ended Test
Dual-ended Test (Main and Remote)
Range 800 m (2600 ft) - Single-ended Test
150 m (490 ft) - Dual-ended Test (Main and Remote)
Resolution 0.1 m or 1 ft - Single-ended Test
0.1 m or 1 ft - Dual-ended Test (Main and Remote)
Accuracy ± (1m 4%) - Single-ended Test
± (1m 4%) - Dual-ended Test (Main and Remote)
Delay Skew
Parameter Twisted Pair Cabling
Range 0 ns to 100 ns
Resolution 1 ns
Accuracy ± 10 ns
DC Loop Resistance Test
Parameter Twisted Pair Cabling
Range O Ω  to 53Ω
Resolution 0.1 Ω
Accuracy ± (1 Ω 1%)
Overload Recovery Time Less than 10 minutes to rated accuracy following over-voltage. Referencing is required after repeated or prolonged over-voltage.

More details on Fluke website
Available Product Inventory Matching Results
( 2 Items )    
   Dealer RatingDealerLocationBrandModel NumberDescriptionNewUsedRentalLeaseCal 
1 23DTX-1800  (2) Axiom Test Equipment CA, USAFluke DTX-1800 Dealer product details page link Fluke DTX-1800 Cable AnalyzerN/AN/AN/AN/AN/A Get Quote
2 144Fluke DTX-1800  (2) Top Dog Test CA, USAFluke Fluke DTX-1800 Dealer product details page link LAN Cable AnalyzerN/A$7,500$500$412N/A Get Quote



Fluke DTX-1800 Related Literatures  (0 Items )
(Show Details...)
Can not find any related application notes
 
Fluke DTX-1800 User Reviews  (0 Items )
(Show Details...)
No user reviews yet. Please share your experience and be the first to review this product!

Add Your Own Review

How do you rate this product: 
   (point your mouse over the stars and click to select)
How long have you owned this product?   

Please enter a title for your review


Please type your review below
Add Review


Fluke DTX-1800 Forum Matching Results  (0 Items )
(Show Details...)
Your search term DTX-1800 did not return any results.
Fluke DTX-1800 Related Videos  (0 Items )
(Show Details...)
No related videos found for Fluke DTX-1800
  Notify me when the product meets my target price

Model Number: DTX-1800
Email Address:
Product Condition:
Target Price:

OK      Cancel


Add Dealer | New User Sign Up | Questions or comments? Contact us, we are listening

Copyright 2008 - 2010 TestUnlimited.com, Your Test Equipment Community!